Magewell Pro Convert Overview
Use the Pro Convert for NDI to SDI Decoder from Magewell to convert an NDI stream with embedded audio to an SDI output signal. This converter supports resolutions up to 2K60 via NDI input and decodes at resolutions up to 1080p60 for 3G-SDI output. Designed to link baseband equipment to IP-based media networks, this component supports full-bandwidth NDI and high-efficiency NDI|HX modes up to NDI|HX3. Supported streaming protocols include SRT, RTSP, RTMP, UDP, RTP, HLS, and HTTP.
Configurable Web UI
- The Pro Convert Web UI is compatible with a wide variety of web browsers and enables web configuration for settings such as the device name, source name, NDI and EDID identifiers, and other settings.
Decoding Features
- Decodes NDI streams up to 2K60 including NDI, NDI|HX3, and NDI 4.5
- Up to 1080p60 3G-SDI output signals
- Supports YUV BT.601 and YUV BT.709 color
- 16-bit, 8-channel audio streams
- Supports AAC/MP3 audio decoders
- Compatible with H.264/H.265 streams in additional protocols including RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP
Supported Web Browsers
- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above
Network Interfaces/PoE
- 10/100/1000 Mb/s Ethernet
- Can be powered via the included USB power adapter or over PoE using the RJ45 port
Onboard Controls
- Menu and Select buttons
- 16-position rotary DIP switch: set board index from 0 to F
- Incorporates a 1/4"-20 mounting thread