Use TitanRF™ Faraday Patch for Your RF Shielding Project or Enclosure
Mission Darkness TitanRF™ Faraday Patch offers the next generation of faraday shielding. It has been laboratory tested and certified to shielding effectiveness standards IEEE 299-2006 (see report details below). The high-shielding conductive adhesive rectangular sheet with rounded edges comes in multiple sizes. The flexible patch is primarily used to mend a punctured faraday bag, connect two sheets of TitanRF Faraday Fabric, seal radio frequency (RF) shielding cages, create a rapid faraday enclosure, EMI shielding, or as a pocket sticker to deflect cell phone radiation away from the body.
If using as a patch, remove backing and firmly adhere to flat surface. Make sure the patch completely and securely covers the punctured area. Large patch sheets can be used to create a faraday enclosure by folding sides and sticking over an object. You can trim the patch with scissors to fit your specific need.
If using with Titan RF Faraday Fabric, place the sheets together and overlap slightly. Adhere the patch to the front and back layers to seal both sides. Make sure all edges are covered. The patch is extremely strong and cannot be removed easily once in place (may damage the fabric if removed).
Simple Way to Repair a Punctured Faraday Bag
1) Peel Adhesive Backing
2) Place Over Punctured Area
3) Firmly Secure to Fabric
Scientifically Proven Performance, Lab Tested and Certified
TitanRF™ Faraday Patch Laboratory Testing, to Confirm Shielding Effectiveness Standards IEEE 299-2006
Testing Completed by Keystone Compliance Laboratory on October 7, 2020
TitanRF™ Faraday Patch has been tested and certified to meet shielding effectiveness standards IEEE 299-2006. The shielding effectiveness test was conducted by Keystone Compliance, a full-service regulatory compliance laboratory offering solutions for nearly all EMC/EMI, environmental, ISTA-certified package and ingress protection testing requirements. IEEE 299-2006 is the standard test method for measuring the effectiveness of electromagnetic shielding enclosures and materials. A properly-shielded device will effectively retain all RF energy in its faraday enclosure and keep all external RF isolated.
The TitanRF™ Faraday Patch is advertised as a material that can be used to isolate devices by blocking the frequency range most mobile devices and electronics transmit/operate within. To provide validation for this claim, the shielding effectiveness test measured how well the material shields frequencies between 1.5GHz to 40GHz. The positive test results provides authentication of its shielding abilities. The full test report and signal attenuation graph can be viewed on the link below.