Convert 4K video from an NDI stream into HDMI with the Pro Convert NDI to HDMI 4K video signal
converter from Magewell. The Pro Convert 12G-SDI 4K Plus features one RJ45 Gigabit Ethernet port
that supports NDI input up to DCI 4K 4096 x 2160p60, and it decodes up to DCI 4K 4096 x 2160p60
8-bit 4:4:4 video via one HDMI output with eight channels of embedded audio. With the latest
firmware update, the converter supports NDI|HX, NDI|HX2, and NDI|HX3 stream decoding.
The unit is powered by a 5V power adapter connected to its USB 2.0 Type-B port or via PoE over its
RJ45 port. It can also connect to a computer via its USB Type-A host port for control via a
keyboard/mouse. The Pro Convert can be managed with a web UI to configure settings and to perform
firmware updates via the USB port. A 1/4"-20 mounting thread allows you to mount the unit in a rack,
with a bracket, or on a stand. Included with the Pro Convert are a USB cable, a 5V power adapter,
and an L-bracket for mounting.
Key Features
Support for up to 4096 x 2160p60 8-bit 4:4:4 decoded HDMI output
Support for up to eight 48 kHz audio channels
NDI Format
Support for up to 4096 x 2160p60 video input
Send NDI streams across network segments
Full NDI, NDI|HX, NDI|HX2, NDI|HX3, RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over
UDP/SRT/RTP protocols (with latest firmware update)
Remotely control PTZ cameras via NDI
Support for NDI 5.x
H.264/H.265 video decoders; AAC/MP3 audio decoders
Features
Very low latency
Advanced configuration and device status through intuitive Web GUI
Delivery is estimated within 25 days of order confirmation.
