MISSION DARKNESS™ DEPLOY KIT 5

KEEP DEVICES SHIELDED AND LIVE During Transport From Seizure to Data Extraction

The Mission Darkness™ Deploy Kit 5 solves multiple problems for forensics investigators and labs. The Deploy Kit 5 stands out from our other forensic enclosures because of its portability, making transferring devices and evidence from the field to the lab seamless. The durable hard protective travel case ensures all enclosed cell phones and tablets are charged and shielded. The portable charging feature is designed to prevent lockout mode, reduce the amount of time needed to break a passcode, and keep the device charged while transferred to a forensic lab. Once the kit arrives, unlocking tools like GrayKey, Cellebrite, Magnet, XRY, BlackBag, and Oxygen can be used to extract the data off the devices.

The Deploy Kit case designed by SKB is constructed with an ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810G) that is resistant to corrosion and impact damage. It includes five fully equipped compartments with all necessary charging components and phone size Window Charge & Shield Faraday Bags to charge up to five devices at the same time. An included backup battery can be charged simultaneously and switched out to provide an undisturbed power supply. Each cable set includes a universal angle USB A/M to A/M extension cable plus a variety of popular cable tips: lightning, micro USB, and USB-C. Easily change cable tips inside the compartment to connect to the compatible device. Each compartment can accommodate either phone or small tablets and cable sets.

*The Vigilant Volt Forensic Data Preserving Power Banks included continuously charge devices once they reach 100% power. This is an important feature for digital forensics use, ensuring that the device stays charged. Standard power banks stop outputting power when they detect that the device plugged into them is fully charged.

Deployment Kit Usage Steps

Deployment Kit Process

1. Remove a Charge & Shield bag from the slot, ensuring you do not disconnect it from the battery.
2. Pull the USB extension cable out of the bag.
3. Insert the correct charging tip into the USB extension cable.
4. Connect the device to the charging tip.
5. Ensure the device is charging. If it is not, press the button on the side of the battery.
6. Place the device back into the Charge & Shield bag.
7. Close the bag tightly.
8. Insert the bag back into the slot.
9. Change the status of the indicator to IN USE.
10. After usage, connect the main power cable.
11. Ensure that all batteries are charging and ready for usage again.

General Notes

• 6 rechargeable batteries come with the kit: 5 usage batteries and 1 backup battery. If the backup battery is required at any point, swap it with a usage battery.
• 5 Charge & Shield bags are included, each of which can accommodate 1 device.
• Each Charge & Shield bag should remain connected to its battery; there is no need to remove the connections.
• Each battery is connected to the power hub and can be charged by connecting the main power cable.
• Battery life can be viewed by activating the battery indicator lights.
• Cable tips are held in each Charge & Shield bag zipper compartment.
• The main purpose of the Deploy Kit is to charge devices from the batteries during transit. Avoid charging devices for long periods of time with the main power connected.