Use the Pro Convert for NDI to SDI Decoder from Magewell to convert an NDI stream with embedded audio
to an SDI output signal. This converter supports resolutions up to 2K60 via NDI input and decodes at
resolutions up to 1080p60 for 3G-SDI output. Designed to link baseband equipment to IP-based media
networks, this component supports full-bandwidth NDI and high-efficiency NDI|HX modes up to NDI|HX3.
Supported streaming protocols include SRT, RTSP, RTMP, UDP, RTP, HLS, and HTTP.
Configurable Web UI
The Pro Convert Web UI is compatible with a wide variety of web browsers and enables web
configuration for settings such as the device name, source name, NDI and EDID identifiers, and
other settings.
Decoding Features
Decodes NDI streams up to 2K60 including NDI, NDI|HX3, and NDI 4.5
Up to 1080p60 3G-SDI output signals
Supports YUV BT.601 and YUV BT.709 color
16-bit, 8-channel audio streams
Supports AAC/MP3 audio decoders
Compatible with H.264/H.265 streams in additional protocols including RTSP, HTTP, HLS, RTMP
Pull/Push, and MPEG-TS over UDP/SRT/RTP
Supported Web Browsers
Microsoft Internet Explorer 11
Microsoft Edge
Mozilla Firefox version 61 and above
Google Chrome version 49 and above
Apple Safari 11.1 and above
Opera 55.0.2994.44 and above
Network Interfaces/PoE
10/100/1000 Mb/s Ethernet
Can be powered via the included USB power adapter or over PoE using the RJ45 port
Onboard Controls
Menu and Select buttons
16-position rotary DIP switch: set board index from 0 to F
Delivery is estimated within 25 days of order confirmation.
