Monoprice™ 4K Braided High Speed HDMI® Cables feature the next generation of active HDMI cable
technology. It delivers 18Gbps bandwidth and supports Ultra HD HDMI video transmissions with video
resolutions up to 4K@60Hz, with YCbCr 4:4:4 chroma sampling, as well as High Dynamic Range (HDR)
video. These cables now support the latest in high resolution performance, HDR, and HDCP™ 2.2
compliance.
This cable supports the following general features:
Supports 4K@60Hz: This cable supports HDMI® video resolutions up to 4K@60Hz, with YCbCr 4:4:4
chroma sampling
Supports HDR: HDR is an acronym for High Dynamic Range. TVs with HDR show a better, more
realistic image with more contrast, brightness, and colors than ever before. HDR significantly
expands contrast ratio and color accuracy. Contrast ratio is related to how bright or dark a
screen is and color accuracy is how closely the colors on the screen match colors in real life.
Bright images seem brighter, with more depth.
Up to 18Gbps Bandwidth: This cable delivers up to 18Gbps bandwidth, which allows it to support
all of the features in the latest HDMI® specification
HDCP™ 2.2 Compliant: High‑bandwidth Digital Content Protection (HDCP) is a copy prevention
technology that's been used on HDMI® connections for over ten years. Compliance with the latest HDCP
2.2 format ensures that the cable will not cause any unwanted dropouts or compatibility issues.
Supports High Dynamic Range video, including HDR10 and Dolby Vision™
Delivers up to 18 Gbps data bandwidth
Compliant with HDCP 2.2
CL3 fire safety rating
Features Spectra7® (formerly RedMere®) HT8181 Active Chipset Technology
EMI verified for minimal interference with wireless signals
Supports up to 32 audio channels with ARC for an immersive audio experience
Support for wide angle theatrical 21:9 aspect ratio
I also purchased a 40ft cable and HDR (deep color) does not work. I get a black screen as if there's no signal if I turn on Deep Color for that particular port on my LG OLED55E6P from a signal that comes from my PC's graphics card (Nvidia Geforce GTX 1080 Ti) I do get 4K@60Hz with chroma 4:2:0 which is good enough for gaming from my couch.
Can I run this to a wall plate and then a shorter cable to the source device? I was unsure since this is an active cable
In that this cable is CL2, you can run it inside a wall. I then connected it, at both ends, to faceplates. Then, I connected the output of the receiver to the one faceplate, and the projector to another faceplate. So yes, you can run a shorter cable. Just be sure to use the source end at the receiver/player and the display end at the projector/tv.
I get no signal when using this cable between my cable service(AT&T) and my TV. I also get the same when used with my camera dvr connect to my TV?
Try reversing the cable, it is directional. source end to source and TV end to TV or monitor