(B2B customers can get this product at ₹ 13200 by availing GST input credit)
Delivery is estimated within 25 days of order confirmation.
Price is inclusive of GST and Import duty charges
Buy on EMI starting at 1824/month
The product is eligible for Free Shipping
Technical Specification
Mission Darkness™ TitanRF Faraday Gloves
The Mission Darkness TitanRF™ Faraday Gloves are made out of TitanRF™ Flex Faraday Fabric, an elastic
high-shielding conductive fabric that has been lab tested and certified to confirm shielding
effectiveness standards IEEE 299-2006 (see report below). The set includes two double-layer
gloves—universal size for left and right hands. They are primarily used for shielded hands-on touch
and device screen operation in forensic labs, RF boxes, and similar enclosures. The material blocks
RF signals such as WiFi, cell signals including 5G networks, GPS, and Bluetooth.
Mission Darkness TitanRF™ Faraday Glove Set
Standard and Extra-Large Sizes Available — Choose From the Drop-Down Menu
Constructed With Two Layers of TitanRF™ Flex Faraday Fabric, an Elastic
High-Shielding Conductive Material
The Mission Darkness TitanRF™ Faraday Gloves are made out of TitanRF™ Flex Faraday Fabric, an elastic
high-shielding conductive fabric that has been lab tested and certified to confirm shielding
effectiveness standards IEEE 299-2006 (see report below). The set includes two double-layer
gloves—universal size for left and right hands. They are primarily used for shielded hands-on touch
and device screen operation in forensic labs, RF boxes, and similar enclosures. The material blocks
RF signals such as WiFi, cell signals including 5G networks, GPS, and Bluetooth.
They are the same gloves used with the Mission Darkness Block Box Lab, and can be easily
installed/replaced in the case of a punctured or worn-out glove. The leading source of signal
penetration in RF boxes is gloves with holes or abrasion that the user cannot see, which is why it
is important to frequently test your lab set-up and replace gloves as needed. *If using the gloves
with a forensic box other than the Mission Darkness BlockBox Lab, installation steps may vary depend
on the particular unit/model; contact us for further guidance or to ensure that the gloves will fit
your unit.
Images above demonstrate the arm length difference between the standard size and extra-large size gloves
Conductive gloves allow the user to operate device touch screens
The glove is constructed out of two independent layers of TitanRF™ Flex Faraday Fabric, a lab certified
high-shielding material
Easily Replace Punctured or Worn-Out Gloves in Forensic Boxes
Scientifically Proven Performance, Lab Tested and Certified
TitanRF™ Flex Faraday Fabric, the same material used in the shielded gloves, has been tested and
certified to meet shielding effectiveness standards IEEE 299-2006. The shielding effectiveness test
was conducted by Keystone Compliance, a full-service regulatory compliance laboratory offering
solutions for nearly all EMC/EMI, environmental, ISTA-certified package and ingress protection
testing requirements.
IEEE 299-2006 is the standard test method for measuring the effectiveness of electromagnetic
shielding enclosures and materials. A properly-shielded device will effectively retain all RF energy
in its faraday enclosure and keep all external RF isolated. The TitanRF™ Flex Faraday Fabric is
advertised as a material that can be used to isolate devices by blocking the frequency range most
mobile devices and electronics transmit/operate within. To provide validation for this claim, the
shielding effectiveness test measured how well the tape shields frequencies between 1.5GHz to 40GHz.
The positive test results provides authentication of its shielding abilities. The full test report
and signal attenuation graph can be viewed on the link below.
Elastic double layer conductive gloves built out of TitanRF Flex Faraday Fabric with dual
paired seam construction (TitanRF Flex Faraday Fabric is lab tested and certified to
shielding effectiveness standards IEEE 299-2006).
Primarily used for shielded hands-on touch and device screen operation in forensic labs, RF
boxes, and similar enclosures.
High-shielding (not mid-grade shielding) material for blocking RF signals such as WiFi, cell
signals including 5G networks, GPS, and Bluetooth.
Provides EMI, EMR, and EMF shielding.
Includes two gloves per set.
Universal size for left and right hands.
Easy to install in the Mission Darkness BlockBox Lab, if using to replace punctured or
worn-out gloves.
Material Composition
Flexible polyester
Metallic copper
Metallic nickel
Two Sizes to Choose From
Standard Size Glove Set SKU: MDFF-GLOVES
Standard size gloves are compatible with the Mission Darkness BlockBox Lab.
Extra-Large Size Glove Set SKU: MDFF-GLOVES-XL
Extra-large size gloves have a longer arm length allowing a wider range of motion inside
forensic boxes, as well as a greater area of covered shielding.
Compatible with the Mission Darkness BlockBox Lab XL.
Applications
Used for shielded hands-on touch and device screen operation in forensic labs, RF boxes, and
similar enclosures.
Prevents EMF radiation exposure when using handheld electronic devices.
Can be used as replacement gloves in RF boxes and enclosures.
*If using gloves with a forensic box other than the Mission Darkness BlockBox Lab,
installation steps may vary depending on the particular unit/model; contact us for
further guidance.
Delivery is estimated within 25 days of order confirmation.
Price is inclusive of GST and Import duty charges
Buy on EMI starting at 1824/month
The product is eligible for Free Shipping
